available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model C150N50Z4 features: ? rohs compliant ? 150 watts ? dc ? 4.0 ghz ? aln ceramic ? non-nichrome resistive element ? low vswr ? 100% tested ? small size surface mount termination description the C150N50Z4 is high performance aluminum nitride (aln) surface mount termination intended as a cost competitive alternative to beryllium oxide (beo). the termination is well suited to all cellular frequency bands such as; amps, gsm, dcs, pcs, phs and umts. the high power handling makes the part ideal for terminating high power 90 degree couplers and for use in microstrip circuits. the termination is also rohs compliant! general specifications resistive element thick film substrate aln ceramic terminal finish matte tin over nickel barrier operating temperature -50 to +200 c (see de rating chart) tolerance is all dimensions in inches. electrical specifications resistance value: 50 ohms, 2% power: 150 watts frequency range: dc ? 4.0 ghz return loss >24 db dc - 2.7 ghz >20 db dc - 4.0 ghz specification based on unit properly insta lled using suggested mounting instructions and a 50 ohm nominal impedance. specifications subject to change. outline drawing unless otherwise specified dimensions are in inches 1 of 2 150 watts, 50
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 available on tape and reel for pick and place manufacturing. model C150N50Z4 typical performance: C150N50Z4 C150N50Z4 power de-rating: tape & reel: *actual performance could be limited by the solder properties of the application mounting footprint and procedure: 2 of 2
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? C150N50Z4
|
